BlueCast Resin X5 SLA/DLP (0.5KG)

BlueCast Resin X5 SLA/DLP has been designed in order to help jewelers in realizing difficult models where dimensional accuracy and structural qualities are required. X5 is raw material based on a synthesized oligomer produced by BlueCast, for which a patent is going to be applied. It is possible to reach outstanding direct casting quality with any type of investment. X5 fits all jewelry needs from filigree to medals as well dental ones. Printed parts are strong enough to be handled without a post-cure process, allowing for a faster, simpler workflow.

• excellent casting of small engravings - both positive and negative
• excellent for stone presetting
• curing triggering tuned to maximize antialias smoothing
• no monomer inside, no smell
• no aggression on plastic parts - tested on PS, PMMA
• no post-curing is needed for casting
• no shrinkage
• easy welding with wax - forget about pattern lost into investment
• can be polished, engraved, or drilled (post-cure is needed)
• low viscosity - easier to recover uncured resin from models, easy to wash
• no preheating required
• very little hygroscopic while liquid - no water absorption while printed
• atoxic, solvent-free, very low phosphine content, very low skin irritant
• cleaner burnout - 0,00% ash residual
• suitable for fast burnout
• full burnout also at lower temperatures (750 C°)
• no expansion during burnout - sublimation starts at 130 Celsius
• excellent dimensional stability in time - no need to stock in cold/dark places
• ideal for jewelry needs
• for DLP and SLA 3D Printers
• works with Formlabs Form1 and Form2 3D Printer

Technical Specification

• Volume: 0.5kg
• Castable: YES
• Castability: Extreme
• Print resolution: High
• Print Smoothness: High
• Resin color: Light Blue
• Post cleanup: Ethyl / IPA alcohol 5 min - Drying with compressed air
• Post UV cure: Not needed
• Post-printing shrinkage: Negligible
• Build plate adhesive needed: Improved from X5

Links

• Chitubox Profiles

Note

• Limited % due to expired few bottles in March 2023!
• Limited % due to SOON expiration date for a few bottles in January 2024!

Safety Rules

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us