Phrozen Resin SC-801 Clear (1KG)

129,95 NL VAT incl. 21%

Not available

SKU 81316
Brand Phrozen

Product description


This product is replaced by Phrozen Aqua Clear 


Phrozen SC-801 Clear

Phrozen SC-801 Clear Resin is a great resin for transparent prints. With correct post processing you can have crystal clear results.

Postprocessing notes

Finished print will be slightly whitish instead of transparent. It requires proper post-treatment to reach crystal clear. Here are some recommendations:
  1. After cleaning by alcohol, keep in mind that your prints will get even whitish. It is general case.
  2. To avoid getting yellowish after post-curing, please use mild UV lamp to cure the model. For example 35W / 405nm lamp
  3. To get highly transparent model, eliminate surface roughness and layer mark are necessary, for example, polishing model by sand paper & using clear lacquer(non-yellowish / glossy one) spray.

Specifications

  • Weight: 1KG per bottle
  • XY Resolution: 0.075 mm
  • Layer Height / Parameter: 20 sec @ 50 um (Phrozen Shuffle / Make ParaLED)
  • Key Performance: Highly transparent resin. Not easy to yellowish in post-curing. Recommend to use low power UV curing light to do post-cure.
  • Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
  • Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED.
  • Application: Optical part, transparent models.

Operating instructions

  • Suggest to use our resin and printer indoor under ventilated situation.
  • Avoid exposure to sunlight and indoor luminescence.
  • Please preserve our resin in closed opaque bottle in avoid of exposure to air.
  • Do not mix used and non-used resin together.
  • Please keep the resin away from kids.
  • Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

  • Do not eat and swallow the resin. Go to hospital if necessary.
  • Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
  • Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
  • Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
  • Suggested safety equipment: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature(15 - 35 OC) and dry condition.
  • This is not bio-compatible resin . Please DO NOT use this material for medical application.

Support

 

Product specifications

Brand Phrozen
Color Clear
Package Size 1 KG
Product State New
Material Group UV Resin
Country Of Origin Taiwan
Resin Wavelength (nm) 405
Material Types Resins
Material Properties Standard
Resin for LCD, Mono LCD
Product application Industrial, Prototyping
Manufacturer EAN 9509682749494

Product downloads

Information Brochure V22