Phrozen Resin TR250 Deep Gray (0.5KG)


Ready to ship within 24 hours

SKU: PHROZEN-RESIN-TR250-0.5KG Categories: , , , Tags: , , , , , EAN: 9506875451714


Phrozen TR250 is a great resin for engineering parts and (dental) thermoforming applications that have to take some heat. It can withstand temperatures of over 150C.

Phrozen TR250 Features

  • Contents: 500gram
  • XY Planar Resolution: 47 micron
  • Z Resolution (Layer Height): 30-100um
  • Normal layer time: 15 sec @ 50 um Delay 3
  • Property:  High hardness, toughness and resolution.
  • Way to Rinse:Clean with alcohol spray with air gun
  • Suitable for: LCD 3D Printer
  • Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application
  • Colour: dark gray
  • Low viscosity
  • Heat resistant upto 150 degree celcius

Key Performance

  • Viscosity: 706 mPa.S25℃)
  • Density: 1.10 g / cm3
  • Tensile Stress (Break): 68 MPa
  • Tensile Modulus: 1050 MPa
  • Hardness: Shore 85D
  • Elongation: 1 %
  • I-Zod Impact: 3.05 KJ/m2

Operating instructions

  • Suggest to use our resin and printer indoor under ventilated situation.
  • Avoid exposure to sunlight and indoor luminescence.
  • Please preserve our resin in closed opaque bottle in avoid of exposure to air.
  • Do not mix used and non-used resin together.
  • Please keep the resin away from kids.
  • Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

  • Do not eat and swallow the resin. Go to hospital if necessary.
  • Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
  • Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
  • Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
  • Suggested safety equipment: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature(15 – 35 OC) and dry condition.


Additional information

Weight 650 g
Dimensions 12 × 8 × 8 cm


There are no reviews yet.

Be the first to review “Phrozen Resin TR250 Deep Gray (0.5KG)”

You may also like…