Phrozen ABS like Gray is a great resin for highly detailed prints. The matte light gray color is perfect for viewing, post processing and painting.
Perfect easy to use resin for Phrozen Transform
Phrozen ABS like Gray Specifications
- Volume: 5KG Container
- XY Planar Resolution: 50 micron
- Z Resolution (Layer Height): 30-100 micron
- Property: High hardness, toughness and resolution.
- Way to Rinse：Clean with alcohol spray with air gun
- Suitable for: LCD 3D Printer
- Application: General modeling & prototyping
- Viscosity: 67 cps
- Density: 1.10 g / cm3
- Tg: 70 degree Celsius
- Break value: 10 MPa
- Tensile Modulus: 1050 MPa
- Hardness: Shore 76D
- Elongation: 3 %
- I-Zod Impact: 1.44 KJ/m2
- Suggest to use our resin and printer indoor under ventilated situation.
- Avoid exposure to sunlight and indoor luminescence.
- Please preserve our resin in closed opaque bottle in avoid of exposure to air.
- Do not mix used and non-used resin together.
- Please keep the resin away from kids.
- Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.
- Do not eat and swallow the resin. Go to hospital if necessary.
- Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
- Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
- Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
- Suggested safety equipment: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature(15 – 35 OC) and dry condition.