Esun Flex (0.5KG)

39,95

Ready to ship within 24 hours

SKU: ESUN-FLEX-YELLOW-TRANSPARANT-0.5KG Category:

Description

Esun Flex (0.5KG)

 

High flex, doesn’t break after multiple fold. Tougher with better tear resistance.

Features

  • High Precision

  • High hardness

  • Shore A: 85-90

  • Density: 1.13 – 1.15 g/m3

  • Viscosity: 1200 mPa at 25C

  • Wavelength: 405nm

  • Shrinkage: 6,9%

  • Tensile strength: 6-8 MPa

  • Elongation at break: 100-150%

  • Tearing Strength: 390-320 kN-m
  • Flexural strenght: 77 MPa

  • Flexural modulus: 2350 MPa

  • IZOD Impact strenght: 44 J/m

  • Color: Orange

Contents

  • Bottle: 500Gr

  • Color: Yellow transparant

How to use

  • Suggest printing temperature is 25-35.

  • When printing in low temperature it need heating ( 40-60) before using

  • Lift height > 8mm.

  • Lift speed ~ 60 mm/min.

  • The waiting time between two exposure > 10s

  • Put printed model in water for post curing. Use direct sunlight for 30 min, or UV LED light for 15mins .

Notes & Warnings

  • Always wear personal protection (gloves, glasses) when handling resin

  • Use your resin 3D printer under well ventilated circumstances

  • Suggested safety equipment: gloves, mask, glasses, and lab coat

  • Do not expose UV resin to sunlight or indoor light containing UV

  • In case you consume UV resin, get medical advise

  • In case resin get’s in your eye, wash your eyes with water and get medical advise

  • Resin can cause skin irritation, always wear gloves when handling

  • Please keep UV resin away from kids

  • Keep resin at room temperature(15 – 35 OC) and dry condition.

Additional information

Weight 700 g
Dimensions 14 × 8 × 8 cm

Reviews

There are no reviews yet.

Be the first to review “Esun Flex (0.5KG)”

You may also like…