Applylabwork Resin DLP Modeling – Clear

89,95

Ready to ship within 24 hours

Description

ApplyLabWork DLP Clear Resin is great for models that require translucency and clarity.   Very minimum yellowing after post curing.

Product features 

  • Calibrated on SprintRays MoonRay printers, Gray Material Selection
  • For DLP type printers.
  • Tensile strength (63-67Mpa) / Elongation (1-3%)
  • VOC Free
  • Note: For other open source DLP printers, please refer to Calibration Tutorial
  • Printing Tips Link

Modeling Gray Specifications

Color: Clear
Size: 1 Liter
Material: Acrylate-based Polymer for 3D Printing
Tensile(MPa): 62-70
Elongation(%): 1-5
Impact(J/m): 28-30
Hardness(Shore): 86-88D
Flexural Strength(MPa): 82-90
Flexure Modulus (MPa): 1700-2200
HDT(°F/°C): 130℉/55℃
Tear Strength(kN/m):
Compression(%):
Viscosity at 77°F/25°C: 340-380

Notes & Warnings

This resin is not compatible with SLA 3D Printers

Additional information

Weight 1300 g
Dimensions 18 × 10 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “Applylabwork Resin DLP Modeling – Clear”

You may also like…