KLD 2150
LCD 8.9″ 2K
Glass backplate
incl. Video board set

187,50

Original part for KLD 2150. 8.9″ 2K LCD Display on 4mm glass back. Get it to repair your KLD LCD 2150 or to start building your own DIY LCD 3D printer.

This set contains:

  • 1 x 8.9″ LCD Display
  • 2K resolution 2560 x 1600
  • Glass backplate 4mm 
  • HDMI – MIPI board
  • Bridge board
  • Cables
  • Original sparepart for KLD LCD 2150

Contact us for availability

Glass backplate
incl. Video board set" />

Already 1 persons shown interest.

SKU: LCD-089-SET-KLD Categories: ,

Description

Original part for KLD 2150. 8.9″ 2K LCD Display on 4mm glass back. Get it to repair your KLD LCD 2150 or to start building your own DIY LCD 3D printer.

Specifications:

  • Active screen area: 191.7mm × 119.8mm
  • Pixels: 2560 x 1600 (2K)
  • Resolution: 75 micron x/y
  • Original sparepart for KLD LCD 2150

This set contains:

  • 1 x 8.9″ LCD Display
  • Glass backplate 4mm 
  • HDMI – MIPI board
  • Bridge board
  • Cables to connect display to bridgeboard and HDMI MIPI board

NOTES AND WARNINGS:

  • Handle the display with extreme care
  • This displays is QC checked and worked before shipping
  • This display is to be installed by trained technician
  • Take proper ESD measures when handling the display
  • Handle the flex cables with extreme care. Do not bend the flex cable to much.
  • Never lift the display by the cables. The cables can be easily damaged because of the weight of the glass
  • Make sure all flat cables are straight in there connectors. Failing to do this could damage the display or driverboard
  • Broken cables are not covered by warranty
  • Broken displays and driver boards are not covered by warranty unless they where damaged during transport,
  • Using this display without protective front glass on your 3D Printer is not recommended by manufacturers
  • Using this display without protective front glass on your 3D Printer can void warranties and is at your own risk

Additional information

Weight 250 g
Dimensions 25 × 20 × 2 cm
backlight removed

No, Yes