KLD 12XXLCD 5.5″Glass backplate

84,95

Original part for KLD LCD 12xx. 5.5″ 2K LCD Display on 4mm glass back. Get it to repair your KLD LCD 12xx or to start building your own DIY LCD 3D printer.

Also compatible with Wanhao D7.

Available for backorder. New stock expected in 2 to 3 weeks.

Already 4 persons shown interest.

SKU: LCD-KLD-000-GLS Category:

Description

Original part for KLD LCD 12xx. 5.5″ 2K LCD Display on 4mm glass back. Get it to repair your KLD LCD 12xx or to start building your own DIY LCD 3D printer.

Also compatible with Wanhao D7.

Using this display directly under your resin VAT without protective front glass give less distortion of the projected image and gives better print results.

Specifications:

  • Active screen area: 121,96 mm × 68,04mm
  • Pixels: 2560 x 1440 (2K)
  • Resolution: 47,25 micron x/y
  • Original sparepart for KLD LCD 12XX

Contents of kit:

  • 1 x 5.5″ LCD Display with glass back

NOTES AND WARNINGS:

  • Handle the display with extreme care
  • This display is QC checked before shipping
  • This display is to be installed by trained technician
  • Take proper ESD measures when handling the display
  • Handle the flex cables with extreme care. Do not bend the flex cable to much.
  • Never lift the display by the cables. The cables can be easily damaged because of the weight of the glass
  • Make sure all flat cables are straight in there connectors. Failing to do this could damage the display or driverboard
  • Broken cables are not covered by warranty
  • Broken displays and driver boards are not covered by warranty unless they where damaged during transport,
  • Using this display without protective front glass on your 3D Printer is not recommended by manufacturers
  • Using this display without protective front glass on your 3D Printer can void warranties and is at your own risk

 

Additional information

Weight 190 g
Dimensions 19 x 10 x 1 cm