Epax X1-K (Mono)

769,00

Pre-order now!

Available on backorder. Next shipment expected August 2020

SKU: EPAX-X1-K-3DPRINTER Categories: , Tags: ,

Description

Epax X1-K (Mono)

Features

  • Parallel Matrix UV light source — This is the most advanced light source, providing more print detail for dental and jewelry applications where finer details are beneficial as well as a more even distribution of the light across the entire build area.
  • Light source closer to LCD screen – requiring less energy for printing and extending the life of your LCD screen. 
  • No Z-Wobble – This printer has an upgraded Z-axis carriage rail. It uses a double steel rod reinforced carriage and steel bearings. No calibration is required.
  • Non-FEP Film for Resin Vat – Our nFEP film has a lower release force than standard FEP films, decreasing your likelihood of print failures caused by layers not releasing from the film.
  • Ultra-Precise Fixed Build Platform – EPAX uses a stable 4-point mount. Your build plate is leveled at the factory and very rarely requires re-leveling.
  • Better Chassis Design – Our printers have all-steel chassis with minimal windows for durability and minimal UV light contamination.
  • Precise Z Homing – All printers are individually calibrated and leveled at the factory so you can begin printing out of the box.
  • Better Door Hinge Design – The top door hinge allows you to position your printer against walls.
  • 3.5-inch Color TFT Touchscreen.
  • 2K Mono (6 inch) LCD masking screen. 2560*1620 (2k) HD masking LCD allows for great print detail and much faster printing speed. Typical exposure times are 2.5 to 3 seconds per layer.
  • The mono screen uses a standard SX04 interface to the mainboard. It can last several thousands hours of normal use.
  • Improved Z-axis stability. 
  • Pre-installed non-FEP film (Imported from Japan) to allow easier detachment during printing (you can still use standard FEP films with this printer if you prefer).
  • Sanded build platform surface made of soft aluminum for better adhesion and easier print removal.
  • Anti-Aliasing supported and enabled in installed firmware.
  • Wide selection of supported resins – you can use any 405nm wavelength 3D printing resins.
  • 130mm (L) *82mm (W) *155mm (H) build volume
  • XY resolution reaches 0.051mm (51 micron);  Minimal Z layer height is 0.01mm
  • Orange Window with External Ethernet port installed.

Technical Specification

  • LCD: 2K 6″
  • XY Pixels: 2560*1620
  • XY Axis Resolution:  51 micron
  • Z Axis Resolution: 10 micron
  • LED Array: LED Array 405nm
  • Build volume: 130*82*155mm
  • Anti Aliasing: Yes
  • Build Platform: Metal sanded
  • Touch Screen: 3.5″
  • Window: Orange
  • Ports: USB, Ethernet

NOTE

  • No resin included! Make sure you order resin to get started immediately.

Warranty

  • 1 year factory warranty
  • Excluded from warranty are consumable parts: LCD display, Buildplate, FEP Film and LED
  • All other components of the printer are covered by the warranty. In the event of damage or defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. If you wish to have us repair or perform maintenance on your printer under warranty, we are happy to do so. We will provide free parts and labor, but you must cover the round trip shipping costs. You may use your preferred carrier.
  • For customers outside EU and in remote areas warranty can only be given if customer takes responsibility for shipping costs.

Support

  • If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us. For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.
  • Email customer support by Epax
  • EU Warranty & Service by FEPshop
  • Facebook community

In the box

  • 1 * Epax X1 3D Printer
  • 1 * Power adapter (EU)
  • 1 * Resin vat with NON-FEP Film installed
  • 1 * Spare NON-FEP Film
  • 1 * USB Drive with manual
  • 1 * Resinvat
  • 1 * Plastic scraper
  • 1 * Metal scraper
  • 1 * Allen wrench
  • 1 * Disposable resin filter

Downloads

Additional information

Weight 10500 g
Dimensions 35 × 35 × 50 cm

Reviews

There are no reviews yet.

Be the first to review “Epax X1-K (Mono)”