Posted on Leave a comment
Posted on Leave a comment

ApplyLabWork Resin – SLA & Formlabs compatible resin

ApplyLabWorks Modeling Gray Example 001

ApplyLabWorks Modeling Tan Example 003
Modeling Tan dental model

Finally available in Europe. ApplyLabWork Resin is a series of SLA & Formlabs compatible resin series. These resins are tuned to behave like regular Form1 and  Form2 resins. Extensively tested on Form2 and Formlabs resin vats.

ApplyLabWork Resin Specifications

Tensile(Mpa) 50-55 50-57 38-40 2-3
Elongation(%) 2-6 3-8 25-35 105-120
Impact(J/m) 24-26 24-26 29-35 N/A
Hardness(Shore) 83-85D 83-85D 83-85D 82-85A
Flexiral Strength(Mpa) 80-85 76-80 53-57
HDT(°F/°C) 119/48.4 117/47.5 113/45.0
Tear Strength(kN/m) 11-15
Compression(%) 2-2.5
Viscosity(cp) 1300~1400 cP 1300~1500 cP 1000~1200 cP 1300~1500 cP

Continue reading ApplyLabWork Resin – SLA & Formlabs compatible resin

Posted on Leave a comment

Maskcreator by XAYAV – Pre-order now

XAYAV Maskcreator

We our proud to announce that the XAYAV Maskcreator will be available next week from FEPshop. We have a limited stock and we are starting Pre-orders today, make sure you get yours.

Why make a mask for your 3D printer? The light from your projector is rarely uniform on DLP Projectors and light sources for LCD printers. To compensate this and obtain uniform print quality your printing software needs a mask.

Posted on Leave a comment

DruckWege Type D White – Facts and Reality

DruckWege Typ D Strength test

Type D Resins have been established in the market now for about 10 months. As this time shows, DruckWege resins are a quite young brand amongst many other resin suppliers. We develop our resins with the self-conception for reliable and high quality products. From our data sheets, you will receive the most detailed overview in technical and safety relevant data that we see as a minimum for such products and beyond.

As some of many specifications are fast curing, low shrinkage and low brittleness, we are convinced from our specified mechanical properties, such as hardness and strength. To reach our outlined specs for the resins, we point to adhere to our data sheets where we give best practice guidelines for various light sources, also on post-curing and treatment.

Read the full article here

Posted on Leave a comment

New reseller: MonoCure3D

Fepshop-Medium-LogoMonocure 3D Logo Master2.3_preview




We are proud to welcome our first official reseller. From today FEPshop film will be available through MonoCure3D Australia.

Partnering with MonoCure3D makes FEPshop film easier to get for a lot of people worldwide. And that’s our mission ‘deliver High Quality FEP Film at a fair price as fast as possible’

To make it even better, MonoCure3D now offers free shipping when FEP film is purchased together with their resin.