Posted on

ApplyLabWork Resin – SLA & Formlabs compatible resin

ApplyLabWorks Modeling Gray Example 001
ApplyLabWorks Modeling Tan Example 003
Modeling Tan dental model

Finally available in Europe. ApplyLabWork Resin is a series of SLA & Formlabs compatible resin series. These resins are tuned to behave like regular Form1 and  Form2 resins. Extensively tested on Form2 and Formlabs resin vats.

ApplyLabWork Resin Specifications

MODELING
BEIGE V1
MODELING
BLACK
MODELING PLUS
OLIVE GRAY
FLEX
Metallic
Group
Tensile(Mpa) 50-55 50-57 38-40 2-3
Elongation(%) 2-6 3-8 25-35 105-120
Impact(J/m) 24-26 24-26 29-35 N/A
Hardness(Shore) 83-85D 83-85D 83-85D 82-85A
Flexiral Strength(Mpa) 80-85 76-80 53-57
HDT(°F/°C) 119/48.4 117/47.5 113/45.0
Tear Strength(kN/m) 11-15
Compression(%) 2-2.5
Viscosity(cp) 1300~1400 cP 1300~1500 cP 1000~1200 cP 1300~1500 cP

 

ApplyLabWorks Modeling Tan Example 001
Modeling Tan art print
MODELING 
BEIGE
Group
Tensile(Mpa) 53±1.5 42±1.7 45±2.4
Elongation(%) 3±1.7 4±2.2 3±1.8
Impact(J/m) 16±0.4 16±1 14±1.1
Hardness(Shore) 86±1.1 85±1.3 84±1.1
Flexiral Strength(Mpa) 92±3 81±2.3 76±1.3
HDT(°F/°C) 135/57 131/55 129/53
Tear Strength(kN/m)
Compression(%)
Viscosity(cp) 1062~1275 cP 975~1175 cP 1025~1200 cP
Leave a Reply